When you see this sewing tip you will be surprised, surely you had never thought of it. Let’s find out what it is, you always will!
Do you often use the sewing machine and would like to make the moment of cutting the thread more functional and efficient? Well, thanks to an ingenious trick you can easily achieve this goal and make quick and efficient wire cuts, without any effort. Making a thread cutter in a few minutes is possible and you can hook it to the sewing machine quickly, here’s how you have to do it!
The sewing machine thread cutter
The sewing machine thread cutter often does not meet expectations and prevents you from using it properly. Depending on how it is taut, the thread can break, but if the thread cutter is not efficient, time is wasted without achieving anything.
The thread coming from the bobbin may break because the tension of the underlying thread is very accentuated. But what to do in these cases? The most obvious solution would be to tighten the screw on the capsule and pull the wire to ascertain what the voltage level is.
However, it can happen that even in this case the thread breaks and prevents you from doing the job in the best way. The stitch may also be longer or slower and affect the result. Or, maybe the thread cutter in the sewing machine is not there at all. So, what to do in these cases? Here’s a trick to solve the problem, quickly and concretely!
Create a new wire cutter
To make a wire cutter, you’ll need to get an empty box of dental floss, which you can find everywhere. Or, if you also floss, when you finish keep the box to be able to use it again. Here’s how to do it:
- Take an empty container of dental floss, open it and you will see that inside there is the coil where the floss is usually wound, which must be empty;
- On the top of the box there is a metal hook, where the dental floss is passed to cut it to the desired length;
- Once the box is opened, with a cutter open the plastic part on the sides, making a cut;
- Once the side parts are open, continue with the cutter and completely separate the upper part from the rest of the box, detaching it completely. You will feel like you have in your hands the part that you usually find under the needle in sewing machines, with a hole on one side and the metal foot on the other;
- Finish the hole well with a pair of scissors and then screw the piece of the box into the part of the machine where the needle is, just above the head;
- Take a screw and screw the piece of box from the hole, then resume working with the sewing machine.
You will see that the sewing machine will do its job at its best and you will no longer have problems.
No more waste with the wire cutter
After you have made the thread cutter for the sewing machine and have therefore saved yourself from wasting a lot of thread, you will see the savings that this solution will bring you. You will use the right amount of thread to carry out the work with the machine, without throwing away a single piece and using the right one you need.
This solution will allow you to achieve significant savings over time and you will have solved a very common problem, in the face of which many do not know how to act.
Follow this valuable advice and spread it to others, to give them the opportunity to use the sewing machine without waste. Saving today is important given the economic crisis and we start with small things, such as sewing thread.
If it breaks down and you can’t work you’ll throw away huge amounts of it and have to buy it back. This way the thread will last much longer and you can save a lot of money!
