Any housewife in the world has a very specific method that allows you to properly clean the bathroom, sanitizing and sanitizing it 100% without too much effort, cleaning the tap properly making it look like new.
As much as we can wash and sanitize the bathroom every day with extreme, deep and careful cleaning, unfortunately it is undeniable, it remains dirty or in any case does not come out as clean as we would like.
There are those who use liters and liters of bleach to obtain a clean and fragrant bathroom down to depth and those who choose to use natural products, which sometimes give satisfactory results, other times not.
Stop limescale, the solution for cleaning at home is inside the kitchen cabinet
In particular, many housewives do not know how to eliminate the traces of limescale left by the water, which accumulate slowly over time until they leave whitish traces that are ugly to look at, especially because they give the feeling of a dirty and neglected bathroom despite the fact that this is not at all.
But be careful, there is a method that allows you to solve this problem once and for all and make sure that the tap returns to being shiny and shiny, as it had just been purchased and installed. As strange as it may seem, to make the tap clean again without limescale, just use a bag that twists around the tap itself, using white vinegar and that’s it.
Here is the remedy against taps full of limescale, opaque and stained
The first thing to do is choose a resistant bag, pour two glasses of white vinegar into it, tie the bag directly to the tap so that the vinegar wets the whole arm. It is left to rest for hours obviously without opening the water, in that period of time the natural product will act with its great descaling properties by removing all limescale residues down to the smallest particles.
If you have the chance, you can leave the bag with vinegar even overnight. Obviously the results will be fabulous. If you want to ensure an excellent result, you can mix five tablespoons of baking soda with water and then apply the solution that comes out using a sponge. Finally, leave it to act for a few minutes and then to finish pass a damp, soft cloth that removes everything.
If small limescale stains remain, it is advisable to use a used toothbrush, i.e. with the bristles already worn out, to remove all deposits. Generally, vinegar is enough to break down all layers of limescale. If you don’t have vinegar at home, don’t worry because you can simply use citric acid which in the same way is an exceptional natural descaling agent.
How to use citric acid instead of vinegar
To use citric acid, the exact same technique is reproduced as the plastic bag with vinegar, only that instead of vinegar citric acid is used, which dissolves in two glasses of water. In this case, 5 tablespoons of citric acid are enough with the addition of a teaspoon of baking soda if you have it.
Then it is attached to the bag at the tap and left to rest for hours or a whole night. At the end you wipe with a wet cloth and the problem will be solved once and for all. In the same way, you can try to whiten the bathtub, sink, bidet, shower and tiles that generally remain opaque and cannot be made shiny again with any product. With citric acid as well as with baking soda or vinegar, the bath becomes perfect again, as if it were new.
