What to do when the noise of the wiper blades becomes annoying? Don’t change them, here’s how to solve the problem by spending only 1 euro and they will be as good as new.
Did you know that it’s easy to fix the problem of windshield wipers when they make noise? Changing them is not necessary, in fact there are remedies that allow them to return to efficiency and perfect functioning, spending very little. Here are some tricks to keep your windshield wipers soft at all times.
Why wiper blades make noise
Wiper blades are essential to ensure maximum visibility for the driver while driving the car, but it often happens to hear annoying noises while moving. What can it depend on?
Simple, the brushes have hardened and rub against the glass, producing an annoying noise. In addition to being unbearable for both passengers and the driver, the noise produced does not make travel comfortable. Finally, it should be noted that rubbing does not clean the glass well and can also damage it. So, what to do?
The first thought to avoid these annoyances is to change them, but obviously they have a cost, so it is advisable to opt for some remedy that allows you to improve their performance by spending very little.
Obviously, the first thing to do is to check for wear. If you find that they are still in good condition, and maybe they just need to be cleaned, then you can proceed. It is clear that if the tires are very worn they are not good, so you have to opt for replacing the brushes. Let’s find out what tricks to put in place to remedy wiper blades that have become hard!
Cleaning the wiper blades with vinegar
If the wiper blades are still recoverable and only need a thorough cleaning, you can resort to vinegar to make them efficient again. By removing all the accumulated dirt you will give them new life and avoid buying them. To clean brushes with vinegar, here’s how you need to do:
- Raise the brushes;
- Pass a cloth soaked in water;
- Soak another cloth in vinegar and pass it over the brushes;
- Wipe the cloth with water again and remove vinegar residues.
You must carry out this procedure gently, without pressing too the brushes, to prevent essential elements from being removed to ensure visibility of the glass.
Vaseline excellent for brushes
After performing the procedure with water and vinegar you can also apply petroleum jelly to the wiper blades. A very small amount is enough to make them smoother and make sure that they clean the windshield without difficulty. To dry the petroleum jelly, hold the brushes up for five minutes.
Tips for keeping your wiper blades running smoothly
It is possible to ensure a long view of the wiper blades, just follow a few precautions that allow you to avoid buying them often. First of all, always carry out the cleaning operations indicated above in the shade, because if they dry quickly in the sun you will find very annoying streaks on the windshield.
In addition, it is advisable to clean the wiper blades at least every three thousand km, especially if you often ride along dusty roads.
In these cases, it is easy for the wiper blades to get dirty often and cleaning operations must be carried out more frequently. It is very important to remove dirt, sand and salt from the brushes to make them last longer!
Importance of water in windshield wipers
To drive safely in all weather conditions, it is necessary to keep the windshield wiper fluid under control at all times, so that you always have optimal visibility. To top up the water in the windshield wipers, you can use common tap water, or demineralized water if the former is too calcareous.
So to top up the water, simply open the bonnet of the car, locate the appropriate tank and pour the liquid, taking care not to let it leak, then close the cap and the bonnet.
After carrying out this operation, start the car and activate the windshield wiper water to check that it is working perfectly. Fill up when the engine is cold.
