There is a secret feature in the fridge that saves a lot of money. Let’s see what it is.
The issue of energy saving, which is fundamental today, must be implemented by using the correct way and implementing tricks to reduce consumption.
The refrigerator, like the various appliances in every home, has a certain energy consumption that weighs at the end of the month. Correct use of this precious appliance is important both for food storage and for its proper functioning. There are ways to reduce the energy waste of your refrigerator, to know them, just read below.
The secret functionality of the fridge
The correct use of the refrigerator at home allows considerable savings in the electricity bill. A functioning and high-performance fridge helps to reduce consumption. According to the data, the average consumption related to the use of the refrigerator is about 150 euros per year. The first thing to pay attention to for the right use of the fridge, in order to ensure efficiency and savings, is to check the temperature.
As for the temperature of the refrigerator, according to what has been set by the Ministry of Health, it must be set between four and five degrees. It must be said that the temperature changes according to the various areas, clearly the highest shelf is the coldest one.
To avoid condensation or malfunction, never place hot food in the fridge. In addition, the fridge should never be overfilled, because it is important that air can circulate between the food. Finally, for the refrigerator to function properly, it is important that it is regularly cleaned.
Reverse the refrigerator doors
To be able to reverse the direction of opening the refrigerator doors, without having to contact technical personnel, it is enough to implement simple actions. Before you can reverse the doors, you need to check if your fridge has the predisposition to fix them on the opposite side of the hinges. The refrigerator, in addition to preserving food in the best possible way, must guarantee good energy savings.
To be able to change the opening side of the refrigerator, the first thing to do is to empty the fridge and freezer. After removing the power socket, you need to identify the pin in the fridge and slowly unscrew the various hooks on the sides of the doors.
In the same way, the screws and pins, located in the lower part of the device, must be removed, tilting it completely in order to remove all the hooks. After removing the plastic spacer bracket, it should be placed on the opposite side. After unscrewing the hinges, you can removethe refrigerator door.
At this point, the various hooks and hinges must be placed on the opposite side, carefully screwing the hooks, washers and plate, which are used for the correct rotation of the door. Similarly, the freezer door must also be reversed. After screwing everything tight, the fridge is ready to be put back into operation.
Tricks to reduce fridge consumption
The first and simplest trick to reduce the energy consumption of the refrigerator is to avoid opening it too many times. This appliance, which runs all day, has a certain impact on your bill. A refrigerator with a high energy class clearly consumes less, about 160 or 350 kWh.
Better to get a new model, since over the years the fridge becomes less and less efficient. In this regard, it must be said that an old refrigerator, for example class C, consumes three times more than a modern class A one.
To reduce the consumption of the fridge, it is always better to place it away from heat sources, to ensure a constant internal temperature. In order to save money, the thermostat must be adjusted to an average temperature, between three and five degrees.
To avoid wasting energy, the freezer should be defrosted, because the ice in the freezer should never exceed 5 millimeters. Finally, the capacity of the refrigerator is also important, since every 100 liters of capacity consumption increases by 10 kWh.
