Do you know how to perform a foolproof method to get devices up and running and save a boatload of money? Simple, you can do it too, here’s what it consists of.
As is well known, tin foil serves many uses, it is practical and versatile, but few are aware of the fact that you can use it to operate certain devices. In fact, a foolproof method to make an LED bulb work when it no longer works is tin foil. Really, this paper that you also commonly use in the kitchen is perfect for getting LED lamps back up and running in a few minutes and being able to use them for a long time to come. Let’s see how to do it.
The usefulness of tin foil
Few people know how useful a simple sheet of aluminum foil can be when a LED bulb finishes working. In fact, it is enough to perform a simple procedure to get the device back up and running. Tin foil, or aluminum foil, is known to everyone because we usually use it to preserve food in a healthy and safe way.
Composed of thin laminated aluminum foil rolled around a cardboard tube, tin foil has recently been shown to be harmful to the body. It seems that some studies have shown that it can cause damage to health, however the values of metal released are really low. However, it is recommended not to use it excessively, especially if you use it for cooking food.
In addition, it should never be placed inside the microwave oven, as the waves produced can spill onto the aluminum foil. Since aluminum does not absorb them, enormous damage could even occur, such as the explosion of the microwave oven.
For the rest, it can be used safely to preserve food, but also for other uses, such as making a LED bulb work again, let’s find out how to do it.
How to operate the led bulb with this foolproof method
Is your led bulb no longer working? Don’t throw it away, you can extend its life by simply using tin foil. In most cases, LED bulbs no longer work even if there is only one LED inside that does not light up.
The problem is due to the fact that they have a single circuit, so as soon as one contact no longer works the others do not even work and the LED bulb does not turn on. To get it working again, here’s how you need to do it:
- Remove the bulb dome, which is usually made of plastic;
- Screw the underside, where the LEDs are, into a lamp;
- You will then be able to understand which LED is no longer working.
After ascertaining which LED has stopped working, here is how you must proceed to restore its functions:
- Take tweezers;
- Touch the LEDs one by one with tweezers;
- Remove the one that doesn’t turn on.
You can easily remove the non-working LED with scissors and a utility knife. After performing this operation, you can use the piece of aluminum to operate the contact and then the LED bulb.
How to apply aluminum
You can apply the piece of aluminum foil, as mentioned before, after removing the non-working LED. Here’s how you need to go about it:
- Cut out a small square, as big as the LED;
- Take some double-sided adhesive and attach it to the bulb area;
- Now take the square of aluminum foil and place it on top of the sticker.
Once this is done, you can turn on the bulb. With great surprise and disbelief you will see that it will be functional. In this way you will have given new life to a LED bulb that you would otherwise have thrown away, you will have saved a lot of money and also done good for the environment. It is a solution that therefore ensures savings and also protection of the spaces that surround us, which is why recycling is important.
