What to do when the noise of the windshield wipers becomes annoying? Don’t change them, here’s how to solve the problem by spending only 1 euro and they will be as good as new.
Did you know that it is easy to solve the problem of windshield wipers when they make noise ? Changing them is not necessary, in fact there are remedies that allow you to make them efficient and perfectly functional again, spending very little. Here are some tricks to always keep windshield wipers soft.
Why do windshield wipers make noise?
Windshield wipers are essential to ensure maximum visibility for the driver while driving the car, but it often happens that you hear annoying noises while they move. What could be the cause?
Simple, the brushes have hardened and rub on the glass , producing an annoying noise. In addition to being unbearable for both passengers and the driver, the noise produced makes it uncomfortable to move around. Finally, it is important to point out that rubbing does not clean the glass well and can even damage it. So, what to do?
The first thought to avoid these annoyances is to change them, but obviously they have a cost , so it is advisable to opt for some remedy that allows you to improve their performance while spending very little.
Obviously the first thing to do is to check their wear . If you notice that they are still in good condition, and maybe they just need to be cleaned, then you can proceed. It is clear that if the tires are very worn they are not good, so you need to opt for replacing the brushes. Let’s find out what tricks to use to fix windshield wiper blades that have become hard!
Cleaning the wiper blades with vinegar
If the wiper blades are still recoverable and just need a thorough cleaning, you can use vinegar to make them efficient again . By removing all the accumulated dirt, you will give them new life and avoid buying them. To clean the wiper blades with vinegar , here’s what you need to do:
- Raise the brushes;
- Wipe with a cloth soaked in water;
- Soak another cloth in vinegar and wipe it over the brushes;
- Wipe the cloth with water and remove any vinegar residue.
You must carry out this procedure delicately, without pressing too hard on the brushes , to avoid removing elements that are essential for ensuring visibility of the glass.
Vaseline is great for brushes
After performing the procedure with water and vinegar, you can also apply Vaseline to the windshield wipers. A very small amount is enough to make them slide more easily and ensure that they clean the windshield without difficulty. To let the Vaseline dry, hold the wipers up for five minutes .
Tips for keeping your windshield wipers in tip-top condition
Ensuring long life to your windshield wiper blades is possible, just follow some tips that allow you to avoid buying them often. First of all, always carry out the cleaning operations indicated above in the shade , because if they dry quickly under the sun you will find very annoying streaks on the windshield.
Furthermore, it is advisable to clean the windshield wipers at least every three thousand km, especially if you often drive on dusty roads .
In these cases it is easy for the wiper blades to get dirty often and cleaning operations must be performed more frequently. It is very important to remove dirt, sand and salt from the blades to make them last longer!
Importance of water in windshield wipers
To drive safely in any weather condition, it is necessary to always keep the windshield washer fluid under control, so as to always have optimal visibility. To top up the water in the windshield washer fluid, you can use ordinary tap water , or demineralized water if the former is too calcareous.
To top up the water, simply open the bonnet of the car, locate the appropriate tank and pour in the liquid, taking care not to let it spill out, then close the cap and the bonnet .
After this operation, start the car and turn on the windshield washer fluid to check that it works perfectly. Top up when the engine is cold.
