7 Tips for Unblocking Toilets Without a Plunger

How to unclog a toilet without a plunger  ?

Unclogging a toilet is a real pain. The best way to do it is to remove whatever is obviously blocking the toilet. But if you don’t have a plunger or plunger handy, put on protective gloves and take out the toilet brush to loosen the top area of ​​the trap. Cover it with a plastic bag. If nothing happens, there is no need to resort to chemicals or call a plumber, the following methods could help you…

1. Hanger

Did you know? A coat hanger can perfectly replace a manual ferret to unclog the toilet. It is an inexpensive and easy method to implement. You just need to follow these steps.

How to do it?

1. Unbend the hanger so that it is as straight as possible. However, the shape of the hook should remain intact.
2. Wrap some contact paper around the part you are using as a handle. This will make the tool easier to handle.
3. Insert one end of the metal wire gently into the toilet hole; the goal is to reach the blockage blocking the pipes.
4. Rotate the instrument while applying pressure to dislodge the obstruction. Be careful, sudden movements can damage the bowl and cause scratches in the porcelain.

Are you done? All you have to do is flush the toilet to evacuate the mass of water and the clog into the septic tank!

2. Dishwashing liquid

Looking for another helpful tip to unclog your toilet bowl? Grab some dish soap! Yes, it’s a great alternative to conventional products used for this purpose. Here’s everything you need.

How to do it?

1. Pour the product into the toilet bowl and then hot water;
2. Wait about twenty minutes before scrubbing the toilet bowl with the brush and then rinse.

The blockage slipped more easily into the pipes. This is also one of the tips recommended by Mellissa, a Home Depot cleaning expert, interviewed by the site express.co.uk .

3. Hot water from the tap or sink

If you don’t have dishwashing liquid on hand, just warm water may suffice. The principle is simple.

How to do it?

1. Boil a pot of water;
2. Then pour the equivalent of 2 to 3 cups of hot water into the toilet bowl. Be careful when handling hot water. This can cause burns.
3. Repeat the process up to three times to clear the toilet pipes. One of the experts from Bob Vila, a home maintenance advice site, invites readers to use large amounts of hot water for good results.
4. Did you manage to clear the blockage? You can now flush the toilet.

And there you have it, your clogged toilet is working again!

4. Coca-Cola

Just like hot water, a bottle of Coca-Cola can help unclog your toilet. In fact, this drink alone is capable of breaking down the cork. And this is thanks to its acidic composition and its corrosive action.

How to do it?

1. All you have to do is pour the contents of a bottle into the bowl.
2. Let it sit overnight.
3. The next day, scrub the inside walls of the toilet with a brush.
4. We flushed the toilet and voila, the clog was gone!

Coca-Cola will also help you remove stubborn stains from the bottom of the toilet bowl. You can also combine it with baking soda before scrubbing again and rinsing with clean water.

5. White vinegar and baking soda

As expected, the surprising duo of white vinegar and baking soda is part of the list of chemical-free toilet bowl unblockers. Plus, they have an immediate cleaning and sanitizing action! To benefit from their magical properties, follow the steps.

How to do it?

1. Add one cup of baking soda to the bowl.
2. Slowly pour a cup of white vinegar down the toilet until a chemical reaction occurs.
3. The mixture in the container will produce a foam that will break up the clog and clear the drain pipe in no time.

Don’t hesitate to use the toilet brush to scrub the inside walls of the toilet.

6. Plastic bottle

It is possible to unclog toilets without resorting to chemicals or other natural alternatives such as white vinegar or baking soda. To do this, simply put on your plumber’s gloves and take out a used plastic bottle. Because you will have to dip your hands in the bowl…

How to do it?

1. Fill a 2-liter plastic bottle with hot water.
2. Place your gloved thumb over the bottle cap.
3. Quickly insert the inverted bottle into the bottom of the container.
4. Then squeeze the plastic bottle to inject hot water into the pipe, which is easier to release the blockage. It’s smarter!
5. Under the effect of water pressure, the blockage will be released.

7. Mop

A mop is another alternative to unblocking a clogged toilet. Want to try this method? Follow the steps below.

How to do it?

1. Wrap a plastic bag around a mop head to form a ball.
2. Then push the tool that replaces the suction cup into the container with repeated strong blows.
3. We pump back and forth and voila! The lid is unlocked.
4. All you have to do is rinse with clean water and let the plastic mop bag drain before throwing it away.

Did you like our unblocking methods? It’s your turn to apply them to unblock your clogged toilets and clean them like a real plumber. If the clog is too thick, you will have no choice but to call a professional to help you.