Apply these tips to clean the washer filter and it will be as good as new. The method to save money.
Due to the frequent washing for which the washing machine is used, the filter of this appliance has a tendency to clog or otherwise become particularly dirty. This is due to several reasons, such as a build-up of tartar, detergent or other residues. Cleaning the washer filter with the right methods is important because clogging and dirt risk creating permanent damage to the proper functioning of the appliance. So let’s see how to clean it properly.
Cleaning the washing machine filter: why it is so important
A dirty or, even worse, clogged filter can be responsible for several malfunctions of the washing machine. For example, it can cause vibrations or loud noises during washes, or it can extend the times of washing cycles. Again, a filter that is not properly cleaned could lead to unscheduled stops during washing or not allow the spin function to work properly, leaving the laundry still dripping with water.
All these malfunctions can lead to a significant waste of energy, and therefore higher costs in the bill. If our washing machine has one of these problems, the trigger could be a dirty filter. So let’s see how to clean it deep to give it a completely new look, saving money.
Preparation before cleaning
For the washing machine to work effectively, you need to clean the filter at least 4 times a year. In this way, fabric residues and “lint” that otherwise risk remaining on washed clothes will also be reduced.
To clean the filter of our washing machine, therefore, we must first remove it. The position of the filter is not always the same, it depends on the type of washing machine used, so it is advisable to check it through the instruction manual of your washing machine. Once the filter has been traced, it is necessary to disconnect the appliance from the electrical current and also cut off the hydraulic supply.
After that, we can arrange basins and a towel in order to collect the water that could come out of the filter, so as not to disperse it around the house.
Cleaning the washing machine filter, how to proceed
At this point we open the filter cover. We should see a black pipe arranged on one side. This hose is normally necessary to retain water so that it is not spilled on the ground when we unscrew the filter. We then remove the cap of the pipe in question and let the water drain into the basin, after which we can close it again.
Once this is done, we unscrew the filter very gently clockwise. If this operation is difficult, tartar has probably formed in the filter, so we can use a dry cloth to unscrew it. Once unscrewed, we can wash the filter with hot water and gently remove all the limescale and dirt inside.
Deep degreasing
If the filter of our washing machine has not been cleaned thoroughly for some time, we will need to degrease it thoroughly. To do this, simply dilute white vinegar, soap and water in a basin, and then leave the filter to soak for half an hour. Speaking of white vinegar, for proper maintenance and deep cleaning of the washing machine, it is advisable to run an empty wash cycle at least once a month after pouring vinegar into it.
Returning to cleaning the filter, last we can also sanitize the case. To do this, we can take a cloth and pass it on the walls of the cap, perhaps with the help of a finger or the handle of a spoon. Finally, we can close the filter again.
Regular cleaning of the washing machine filter done in this way will ensure a clean and sanitized washing machine and avoid many breakdowns and malfunctions, allowing you to save considerably.
