Did you know that putting fabric softener and coke in the toilet has an incredible effect? You should do this operation at least once a month, but let’s find out why and how to do it to get a really effective result!
Cleaning toilets, just like cleaning the bathroom, requires a certain amount of care and attention to disinfect and disinfect them as best as possible. This is usually one of the most common household chores and the toilet must be cleaned thoroughly to prevent germs and bacteria from accumulating and potentially harming your health. Products sold in supermarkets sometimes do not have the desired efficacy and do not work on yellow stains.
Plus, they’re expensive, and not everyone can afford them. To save money, you can opt for valid and quite effective alternative solutions, capable of acting also on yellow toilet stains.
But how to create a suitable solution for cleaning and disinfecting toilets, but above all for removing the yellow stains that often form on the walls? Some methods are little known, such as Coca Cola and fabric softener, which combined can achieve unthinkable results.
But it is also the addition of another natural ingredient that guarantees extraordinary results, namely bicarbonate, the anti-limescale par excellence, and also endowed with a high degreasing power. Let’s find out how to find a solution with these easy-to-find and also cheap ingredients!
What is needed to prepare the solution for the toilet
You need easy-to-find products to prepare an effective solution that can remove dirt from the toilet and remove yellow stains that form due to urine. Here’s what you need:
- Demulcent
- Coke
- Bicarbonate
- A large enough bowl
- A plastic bottle with a spray bottle
Once you have everything you need to prepare the mixture for toilet cleaning, here’s the exact procedure for making it.
How to Make the Fabric Softener and Glue Mixture
The preparation of the softener and glue mixture is simple, just pour the products into the bowl as shown below:
- Pour fabric softener and equal parts coke into the bowl.
- Mix well with a spoon and let the mixture mix
- Add two large teaspoons of baking soda
- Mix again for a few minutes
A foam will form and increase the volume of the mixture. At this point, take a funnel and pour the mixture into the plastic bottle. Screw the spray bottle firmly and shake the mixture to mix it completely.
How to use the mixture in the toilet
After preparing the fabric softener and cola mixture, and adding baking soda, it’s time to use it to remove stains from the toilet and disinfect it thoroughly. Here’s how to do it:
- Spray the mixture on the yellow stains on the toilet
- Keep spraying until you reach the bottom
- Leave the mixture on for 7 minutes
Once the time is up, take the brush you usually use to clean the toilet and scrub the walls where you sprayed the fabric softener and glue mixture. The yellow stains will disappear instantly and the dirt accumulated in the toilet will disappear completely.
Continue to scrub the toilet brush for a few minutes, then flush the toilet to remove any residue. The toilet will look very clean and shiny, like you’ve never seen it before! The scent will last for the next 24 hours and the bath will be fresh and smelly. If any stains remain, repeat until the dirt and yellowing are gone.
With this effective method, you will be able to give the toilet a new life and you will be able to clean it perfectly whenever you want. Do this once a month to keep the toilet clean and disinfected as best as possible and the yellow stains will not last long, as the degreasing action of the mixture will remove all traces of dirt.
